How to Maintain the Daily Maintenance of Aluminum Doors and Windows? -Ruminum Profiles Supplier

Doors and windows are like human body and cars, and they need to be maintained regularly. Adopting appropriate methods to maintain aluminum doors and windows can not only extend its service life, but also more importantly, it can improve its safe use performance and prevent doors and windows from loosening. Avoid the door frame or glass fall and hurt yourself or others.

Therefore, what measures should we take to maintain aluminum doors in daily life! The window here is some convenient and feasible maintenance tips, for your reference only.

1. Glass clean

(1) If you can only be covered with dust and you can touch it, wipe it with a wet towel. Wet the towel with water and then twist. Wipe the front and back of the glass.

If there is stains on the glass, change the water again. Wipe again

(2) If it is a tall building, it is best to use a glass scratcher so that people can stand on the ground.

If you can't touch the back, please ask professional cleaning staff to clean. Be careful not to extend your body out of the window;

(3) Wipe with waste newspapers. After wiping with newspapers repeatedly, you can quickly remove stains such as dust and make the glass look brighter, as if it is brand new.

(4) The remaining beer can also be used to wipe the glass;

(5) Slightly heated and consume vinegar, and immerse it in a clean glass with a towel; (7) Soings can be immersed in the toothpaste to treat stubborn stains, and then wipe it with a towel. Avoid using cleaning balls, so as not to leave traces on the glass surface and affect the appearance; take a pot of water, evenly add a little detergent, laundry powder and other neutral detergents, and then wipe it with a soft towel, and then wipe it with water to avoid generating produce bubble. Do not use a strong acid or strong alkaline cleaner, otherwise it will corrode the glass surface; 2. Clean the door frame usually, wipe it with a wet towel, or use a whitening effect of toothpaste. Wipe with a toothbrush dipped in toothpaste to brighten the door frame. For special stains, such as pen printing and paint marks, rubber can be immersed in water, or uses hot vinegar, or even dipped in oil -saving, can make the aluminum doors and windows achieve good cleaning effect.

3. During the use of cleaning and sliding, aluminum doors and windows are often found to be unable to open or pull.

At this time, do not push forcibly push to avoid damaging doors and windows due to excessive force. Pay attention to whether the doors and windows are slippery. The foreign bodies can be removed by the following methods. These foreign bodies may be accumulated in dust. The stone sand remaining in the decoration process or the debris floating in the outdoor air.

(1) Due to the narrow sliding sliding sliding sliding sliding sliding sliding sliding sliding grooves of the aluminum doors and windows, the person's hands cannot reach. You can wipe it with a wet cloth first, then pick up the wet cloth with chopsticks and other small objects, and then shuttle back and forth. In the groove. The internal dust was absorbed and extended by a wet cloth.

(2) For stubborn and dry sand, first use a small tool to shovel. Be careful not to scratch the inner grooves of the aluminum -type doors and windows, and then use a vacuum cleaner to suck back and forth (remove the vacuum cleaner and compare it with the easy -to -use straw). Wipe the wet towel several times to remove the dust and impurities, so there is no remaining armor.

4. In the normal use, in addition to keeping the surface of the aluminum doors and windows clean, you must also pay attention to other aspects of safety. If you find that the doors and windows are difficult to push and pull, please try to open and close gently, loose door frames, glass damage, etc. should be taken in time. Remedies should be taken in time. Measures take measures to avoid hidden safety hazards and impact performance. Please pay attention to the following points:

(1) Check whether the aluminum doors and windows are loose or aging, and change it in time if necessary, otherwise it will cause rainwater penetration and reduce its sealing performance and thermal insulation effect;

(2) Please pay attention to whether the connector and hardware accessories of the aluminum doors and windows are complete, whether the door gear is loose, whether the screw is rust or lost (if.), Please tighten it with a screwdriver in time. Change it directly, otherwise it will easily cause doors and windows to slide. Caused doors and windows damage;

(3) If the slide of the doors and windows is not flat, a few drops of oil can be dripped in the sliding hand, or the pencil core is crushed and sprinkled into the groove to play a good lubrication effect and extend the service life of the aluminum doors and windows of the use of the service life.