Author: WJW Aluminum Window Manufacturers
During the squeezing processing of industrial materials, it also needs to use lubricating oil to reduce the friction between the metal and the squeezing into a tube wall. The friction between the perforated needle and the surface of the mold will be reduced, and the wear of the module between them.
Because the use of lubricating oil during aluminum squeezing processing, it usually causes the surface pollution of the product, and the lubricant may flow into the center of the product to produce a more obvious "squeezing tail". In the formation, "no lubricating squeezing molding" has been used in the past few years. In pipe and hollow material squeezing molding, it is only lubricated to the surface of the mold and the surface of the perforated needle.
In recent years, in order to squeeze the large and complex hard aluminum alloy profiles on a limited ton -tonnage squeeze, it also improves the squeezing molding speed and obtaining the tissue performance of the squeeze. It has been widely studied for lubricating and squeezing molding methods, and because of the breakthrough in the structure of work molds and lubricating oil, it has made a great development of lubricating squeezing the French Friends Chain.
Lubrication and squeezing molding can greatly reduce the pressure of squeezing molding, improve the speed of squeezing molding and improve the organizational performance of the product. Reacting with high -temperature aluminum reactions to form tritinal dioxide, so it is produced by the effective adhesive metal flow. Therefore, the three -iron dioxide is the cause of the molten aluminum.
There are standards for various industries in various industries. Each product has the standards of various products. The same is the same in industrial materials. Whether it is the production process or cutting accuracy, these are standardized.
The hardness standard of industrial materials: Usually the industrial material of 6060 materials is 8 degrees, and the hardness mentioned here refers to Wei's hardness.
Industrial materials size standards: The length of the industrial materials manufactured by the current industrial materials manufacturers on the market are 6.02 meters. If it is necessary, it is only necessary to be processed and usually cannot be longer than 7.6 meters.
Industrial materials cutting standards: The general cutting error is 0.5 mm, so when the industrial material framework is assembled, it cannot be installed.
Industrial materials production standards: The manufacturing of industrial materials meets the European standard production standards: ISO9001 quality management system. It uses standard aluminum ingots without mixed with scrap aluminum, thick walls, and no corners.
The market has a lot of use, and there are more and more industrial materials manufacturers. Many people say that their industrial materials have a thick wall. However, in this messy industry, many people can avoid cutting corners. Buy it cheaply, but the specific thickness of the industrial material is really the same as what the shop says, there is no difference? In fact, the total weight of each industrial material theory is different from the specific total weight. Manufacturers, the total weight of the industrial materials produced by each batch will be different. Why is there such a situation? We all know that the different specifications of aluminum alloy profiles are placed in the mold with a round stick. The total weight of the mold is that the mold is consumed, that is, the longer the mold is used, the thicker the wall thickness of the industrial materials, so the total weight of the industrial materials coming out is different, industrial materials.