Aluminum Alloy Doors and Windows Installation Steps and Some Professional Knowledge Introduction

Many Chinese people often invest more time and energy in the design and decoration of smart homes to choose home, especially when buying aluminum doors and windows, often ignore the installation of aluminum doors and windows. In fact, installing aluminum doors and windows is also developing a little bit. The key to poverty, students will lead to various social problems in the future. Therefore, it is necessary to understand the professional knowledge management of aluminum doors and windows.

1. Line positioning:

(1) According to the installation location, size and height of the doors and windows in the plan, place the line and window to place the line from the line to both ends of the window. For multi -layer or high -rise buildings, the pendant or latitude and latitude instrument is led to the side line of the doors and windows, and a single non -straight edge of the non -straight edge is cut off at the marked symbol of each floor of the door and window.

Due to the combination of curtain wall technology and technology, doors and curtain walls respond to the call of global energy conservation and emission reduction, intelligent curtain walls, such as solar optical light curtain walls, ventilation channels to breathe the curtain wall, inductive wind and rain smart curtain wall, etc., will show the unique charm of the building. "The doors and windows in aluminum doors and windows are connected to the wall. The main feature is that the surface of the junction with the wall is mostly plane, fixed on the wall, and cannot be moved. Get up, so it is also known as hanging walls, which is a modern large -scale, light -quality wall commonly used in high -rise buildings. The structure of the building siege consisting of a structure frame and inlaid plate does not bear the load and role of the main structure. Based on the horizontal line, the floor room plus 50 cm. The subcutaneous height of the windows of each floor must be consistent.

2. Ventilation device for aluminum -type windows:

According to the requirements of the construction design drawing, the hanging hanging is fixed on the aluminum -type window to ensure that the choice in different directions is correct and the equipment is firm.

3. Corruption treatment:

The main content is as follows: (1) When designing the appearance of the doors and windows, if the anticorrosive treatment is required, according to the planning process, if the plastic film with no need to plan or the anti -corrosion coating film is repaired, the outer door of the cement mortar aluminum aluminum can be directly used. , Electrochemical response and contact with aluminum doors and windows to avoid corrosion contact with aluminum doors and windows.

(2) When installing aluminum -type doors and windows, if you choose to connect the iron parts to fix it, the metal material parts such as iron parts and fixed pieces should be used for stainless steel parts. , Correct aluminum doors and windows.

4. Installed aluminum doors and windows:

According to the positioning line marked by the doors and windows, install an aluminum -type doors and windows to adjust the level, vertical and diagonal length of the doors and windows in time to achieve quality standards.

5. The fixation of the doors and windows of aluminum materials:

(1) When there are iron parts embedded on the wall, the iron feet on the doors and windows of the doors and windows can be directly welded by the iron feet on the doors and windows of the doors and windows.

(2) When there is no embedded iron parts on the wall, the expansion of different metal materials can be expanded through bolts or plastic to expand and bolts to fix the iron feet of the aluminum doors and windows to the wall.

(3) When there is no embedded iron parts on the wall, you can also use an electric drill to hit 80mm deep and 6mm hole on the wall, use 6rmn reinforcement with 80mm50mm of L -shaped 80mm50mm, and apply 108 glue to mud on the long one end for mud. Then, after entering the perforated, after 108 glue and mud finally condensed, the industrial aluminum profiles are used as the iron foot of the doors and windows and the buried 6mm steel bars.

6. Treatment between doors and windows frames between the gap between the wall:

1. After the aluminum -type doors and windows are fixed, the first test of the shading project is performed. After the test, the gap between the doors and windows and the wall is treated according to the planning requirements.

(2) If there is no plan and no required plan, you can use elasticity for the insulation engineering material or glass wool felt strip to fill the gap in the concrete, and leave the outer surface of 58mm deep groove to fill the joint seam or seal.