Aluminum Profile Extrusion Mold Failure and Processing Method-WJW Aluminum Supplier Aluminum
Author： WJW Aluminum Window Manufacturers
Because of thermal expansion and contraction, aluminum profiles will be about 1 set of meter = 10 below rice smaller than the mold specifications. The most widely used non -ferrous metal structure materials in the aluminum alloy profile industry, in aviation, aerospace, automobiles, machinery manufacturing, ships, buildings, decoration. The square tube and round tube, the new model is to test the thickness of the wall first, and then see if the work belt is flat, then it will be used or repaired. The most widely used non -ferrous metal structure materials in the aluminum alloy profile industry, in aviation, aerospace, automobiles, machinery manufacturing, ships, buildings, decoration.
1. Fast (drum): fast -blocking place or slow place, grind the guide mouth (slowing) in the direction of the material with the work band, and the direction of the ingredients with the slow side of the job or Narrow the work belt (accelerate);
2. Slowly (recessed, there are slow drums): Slowly grinding or blocked places, the same opposite direction (solid and hollow are presented on the same aluminum profile. );
3. The material is not fast, and then it is fake and fast: the workband is uneven, grind it in the direction that makes it slow, and let it work flat;
4. The material is not slow, and then it is slow to fake: the workband is uneven, grind it in the direction that makes it fast, and let it work flat;
5. Twist of teeth: grind the direction of its distorted direction (because of which direction you go to, which direction you will twist);
6, the groove grooves are smaller and large: grind a storage hole in the side side of the trim of the groove, otherwise block the area around the area;
7. The profile has scratches: The mouth before polishing after the new mold nitrogen is nitrogen, the mouth is not good, and the work is garbage;
8. The aluminum alloy material has muscles: the mold work belt is cracked, rushing off, and there are small scratches to return to the factory for repair.
9, uneven wall thickness: knock on the other side of the mold wall, the thick side of the wall;
10. The radiator is slow and faster: slowly on the top of the teeth on the top of the teeth, and it will be blocked when it is fast;
11. Small holes with screw holes and the same kind of similar kinds are slow and fast: enlighten the streaming pores, polish the small hole workband, block the pores. The most widely used non -ferrous metal structure materials in the aluminum alloy profile industry, in aviation, aerospace, automobiles, machinery manufacturing, ships, buildings, decoration.
