Application of Chemical Polishing and Industrial Material Chemical Factories in Decorative Strips-WJW Aluminum Supplier Aluminum

Chemical polishing is a method of eliminating the grinding marks by the selective fusion effect of chemical reagents on the appearance of the tested product.

1. The purity of the decorative strip industrial material aluminum is too low. When the purity of the aluminum in the decorative strip industrial material is not suitable for chemical polishing, it is changed to nickel plating or chrome -plating under may be under the conditions.

2. The appearance of the industrial material is dirty. The decorative strip industrial materials need to fully strengthen the pre -processing before entering the chemical polishing solution. Do not have stains in the appearance of the industrial material.

3. The phosphate ingredients in the polishing solution may be too low. After the moderate filling is filled, if the industrial material is not seen at this time, there is no other conditional effect, then it can fill in a small amount of nitric acid or sulfuric acid and then try it. Under normal circumstances, it can be adjusted.

4. The temperature of the polishing solution is too low, and the temperature of the decorative industrial material polishing solution is wide, but the temperature has a very obvious impact on the transformation of the solution's composition. Quality, because each component is within the process specifications, and the viscosity is small. When the corresponding time is used, the relevant component ratio in the solution is changed, and the viscosity of the solution is increased. Generally, the temperature of the upper limit of the process specifications needs to be used. The industrial material occasionally cannot meet the polishing requirements even if the temperature is achieved. Therefore, the temperature of the solution should be temporarily adjusted according to the specific situation of the decorative strip industrial materials when polishing.

With the development of Industry 4.0, industrial materials are becoming more and more popular, such as laboratory equipment, factory operating workshops, sun room skeleton, car bracket, etc., can be made by industrial materials. What are the unexpected products?

The first is to move the small cart in the mobile week. Many of the automated factories need to abide by the JIT principle. At this time, there is a small cart that can be used to turn the material. Where can it be carried? Small carts.

The second is the material rack. In the automatic factory, the warehouse will have the remaining materials to prepare from time to time. At this time, there is a strong material rack that can save a lot of time and cost. Ben low, saving a lot of time and cost.

Third, the workshop workbench in the workshop. The workbench workbench in the workshop is mostly used with the anti -static radio cushion to play a role in anti -static. The size of the specifications can be customized as needed. material.