Avoid the Problem of Bending of Aluminum Manufacturers of Aluminum Profile Manufacturers? -Ruminum Profiles Supplier

Aluminum Profiles SUPPLIER aluminum processing processing bending problem? Aluminum squeezing adjustment: Adjustment is a serious link of curved profile. The adjustment of the adjustment should pay attention to adjusting the power of use. Excessive strength may produce deformation, close, orange peel, etc. ,bending.

Aluminum profile extrusion framework: This link is also very important. After the length of the size is sawed, the framework is performed. Fashion framework workers should pay attention to whether this material is large or small materials, whether it is a material or a plane mold material. Injury thermal heating aluminum profiles use disposable extrusion technology, which not only reduces the number of molds, but also effectively avoids problems such as technical defects.

The hardness of aluminum profiles allows more than 13 or more of the plie -type hardness, and the hardness of the aluminum profile of the process allows the clamp -type hardness by about 10. Injecting gel insulation aluminum profile is to pour the pouring glue into the aluminum -type insulation tank in one -time to form a thermal insulation bridge. Due to the high adhesion of the pouring glue, the thermal insulation bridge and the aluminum profile are completely bonded into one. The heat insulation aluminum profile is high.铝材在穿条式隔热铝型材本身是通过两次挤压成形的之后把隔热条穿到两块铝型材的工艺槽内再经过辊压使得材料结构发生变化产生应力使The overall strength of the profile is poor. Such a process limits that the strength of the thermal insulation material cannot be high, and sometimes it is even used for the slightly large hardness of the profile and produces obvious cracks or fractures to make it waste.

The above is the Aluminum Profiles SUPPLIER aluminum processing processing problem that we introduced today to avoid content. I hope it will be useful to everyone!