Curtain Wall Glass Cleaning Method and Dry Hanging Method-WJW Aluminum Supplier Aluminum

Method of curtain wall glass cleaning method:.

1. Wash with solvents, use solvents such as dyshane, toluene, inorganic alcohol or ether to remove fats and upper light materials. Pay attention not to use too strong solvents to avoid damaging the sealing glue of fixed glass.

2. Normal cleaning and drift, should be cleaned frequently, drift and dry the glass, especially during the construction period, should be soft, clean, dust -free cloth and neutral soap, lacquer or slightly acidic cleaning solvent, cleaning agent or slightly acidic cleaning solvent. After washing, pour water immediately with water, and then wipe the remaining water with a clean rubber broom, because the fingerprint printing, oil dirt, stain, dust, dust, sealing residue, scratching and any any of the scratch, scratching, and any any of the scums on the coating glass are The surface abrasions are more conspicuous than ordinary glass, so we should be careful when managing and cleaning coating glass. Therefore, coating glass may be required to be cleaned frequently during the entire project. Always use a compartment board.

3. Surface injury, stained by concrete, and sometimes released from mixed -building curtain wall concrete or building masonry during the storm. The alkali or fluorine -containing substances may be dirty or corroded. The concrete structure in front of the window arch should be designed. OK, so that the dripping water will not drip on the glass. When making prefabricated boards and other concrete wall materials, it should be fully stirred to make it uniform aqueous compounds and completely solidify. Stone eyes, grouting, waterproof material, etc.) should be over before installing the glass, and the pieces should be cleaned.

The dry hanging wall of the stone curtain wall is a new type of construction technology in today's outer surface decoration. The main principle is to set the stress point on the structure of the subject. The grouting method is pasted on the outer wall. What are the dry hanging methods of the stone curtain wall?

1. Stone curtain wall dry hanging-rear planting parts.

The rear planting parts, the steel plate and the corner code are welded in the factory, and the whole can be installed after the hot tin plating.

2. Stone curtain wall dry hanging-needle-selling building curtain wall.

It is an earlier way of hanging hanging. It originated from abroad from abroad in the early 1980s. It is a reference part of all dry hanging methods. Its main stress point is to sell the needle. The phenomenon of cracks, and it is necessary to work, and it has been gradually replaced by other methods.

3. Dry the stone curtain wall-butterfly.

The shape of this pendant has destroyed the intensity of the pendant when making molding. It is easy to cause damage during installation. It also requires a lot of glue. The cost is large. This kind of stone curtain wall is not commonly used.

4. Stone curtain wall dry hanging-defense.

Commonly known as the welding head, this dry hanging method should be regarded as a common type of crime in the current decoration construction. Its transmission power can effectively reduce the damage rate of stone materials. When welding The phenomenon of oxidation and corrosion and falling off. If it is more severe, the embroidery water seeps into the stone along the groove, and the surface of the entire curtain wall will be like skin diseases, which will affect the overall environmental protection and beauty. Use on high -rise buildings.

5, stone curtain wall dry hanging-dorsal embolism.

This kind of stone curtain wall is introduced from Germany. The method is to punch holes on the back of the stone, connect the keel with money, and then fix it by the cut anchor embolism. The deformation problem and the operation are cumbersome, so there are not many ways to use such dry hanging methods.

6, stone curtain wall dry hanging-back hanging type.

The back -hanging type can also be called a hidden suspension. It is the mainstream dry hanging method today. The pendant uses the patented silicon magnesium alloy of the United States, Britain, and the patent of Taiwan. Its construction method is Fixed, there is no connection between the board and the board, so the irregularity caused by the connection of the board surface will not be possible. The material of the silicon magnesium alloy is lightweight, it has the characteristics of corrosion resistance, high temperature resistance, anti -aging, etc., which is particularly suitable for it. High -rise buildings are used for earthquake -resistant buildings, building curtain walls.