Curtain Wall Project Construction-WJW Aluminum Supplier Aluminum

At the beginning of the construction, the curtain wall has been entangled in the market that is commensurate, and every construction is inseparable from the curtain wall. The variety of curtain walls includes many of the glass curtain walls, stone curtain walls, and aluminum -board curtain walls. What do curtain walls need when construction. The first is what to prepare before the construction of the curtain wall and then construction. The curtain wall consists of a structural frame and inlaid board, and the building enclosure structure that does not bear the main structure load and function of the main structure. If the doors and windows and curtain walls have a panel and support structure system (supporting device and support system), it can have a certain displacement ability or a certain deformation capability compared to the main structure of the main structure. The first is the processing and manufacturing of embedded parts. When the embedded parts are processed and manufactured, the anchor plate should be met with Q235 and Q345 -grade steel. The anchor bars of the forceful embedded parts should be used for ribs or light. In addition to being accepted, when the light rounded steel bars are adopted, the end of the reinforcement must be made to create a hook. During the device, in order to ensure the solidity of the main structure of the main structure of the embedded parts, the main structure of the main structure of the connected part should not be lower than the C20. Light -quality fill wall should not be supported by the curtain wall. When the glass curtain wall is installed, the cargo color on the frame should be cleaned first. Then in construction, this may make the curtain wall more strong. When using silicone structural glue, you must use the pass, and you must not use the expired sealing glue. When the glue is injected, the premise of the indoor environmental temperature and humidity should be consistent with the delineation of structural glue products. The request room is cleaned, the temperature is between 15 and 30 C, and the absolute humidity should not be less than 50%. When the glass curtain wall is manufactured in the glass sector, the glass of the glass should be correctly controlled. If the doors and windows and curtain walls have a panel and support structure system (supporting device and support system), it can have a certain displacement ability or a certain deformation capability compared to the main structure of the main structure. The coating surface of the single -piece coating glass should be facing the side of the room; the coating surface of the coating hollow glass should be faced towards the mid -air layer. Silicone structure sealing glue is very low in the eternal load. Standard requests hidden frames or horizontal semi -hidden frame glass curtain walls. Each glass should be provided with two aluminum alloy or stainless steel brackets. The trustees should be able to receive the self -weight of the division glass, and the length should not be less than 100mm or the thickness should not be less than 2mm. Strictly follow the matters of the solvent products used. Fireworks are strictly forbidden to use solvents. After the device is over, it is necessary to check. After the inspection is over, the problem is not a problem to be considered the end of the construction.