Energy-saving Building Doors and Windows Development Characteristics of Thermal Insulation Profile-WJW Aluminum Supplier Aluminum

The development characteristics of energy -saving building doors and windows of insulation profiles

Insulation contour, that is, the outer layer of aluminum alloy profile. The connection of non -metallic heat insulation materials with a low intermediate heat conduction rate is a composite material insulation bridge. The thermal distribution is applied to green energy power generation aluminum doors and windows. , Poor insulation, a single key technical problem with the product, the hollow glass thermal insulation profile of the new doors and windows, has the following advantages:

1. Energy saving and preventing knotting: The K value of the heat conduction performance coefficient can be reached below 3.0, which effectively prevents the calories of the indoor and outside of the door and window through the transmission, which can save more than 45%of the resources and energy. The temperature environment of the room is close, reducing the phenomenon of doors and windows caused by lack of water in the room. Homorphous aluminum plate on both sides of the home, fill in honeycomb -shaped aluminum cores in the middle. The density of the aluminum honeycomb core on the market is usually 5*0.03 (5 is the edge length of the honeycomb core, 0.03 is the thickness of the honeycomb core, the smaller the edge length, the larger the density, the higher the thickness value, the higher the strength). Compared with the two materials, their functions are the same. The PVC board is thicker and highly cost -effective, and the honeycomb board has a higher environmental protection factor, but its processing is complicated. At present, all aluminum home consumers can generally accept these two materials. Materials that are connected to the walls and windows doors and windows and doors and windows. The main feature is that the surface of the wall is mostly plane, fixed on the wall, and cannot move. All-sided aluminum plates of all-aluminum home, PVC board core filled in the middle of the PVC board on the market, usually about 1.4-1.8 density values (the smaller density value, the better the quality).

2. Environmental protection and comfort: The multi -type cavity structure of different hollow glass and thermal insulation aluminum profile with a certain thickness can more effectively use the resonance effect of the sound waves to prevent the transmission of Chinese sounds. Living environment. At the same time, enterprises save resources and energy, which can reduce the use of air conditioning and heating system equipment. In addition, aluminum profiles can not be effectively recovered and reuse, without pollution, which is conducive to the protection of the development of the environment.

3. Good water density and good gas tightness: The new aluminum alloy doors and windows are designed with wind-proof rain, making its wind pressure and gas density reaching level 1, and the water density is I-III.

As shown in the figure, decorative performance: use different surface treatment methods, use different colors, decorative indoor and outdoor decorative effects with different styles of the surface insulation profile together.

Therefore, the thermal and broken bridge aluminum doors and windows have become a more popular energy -saving green and environmentally friendly doors and windows, which are loved by many different consumers in China.