Everyone Knows What Is the Melting Point of Aluminum? Aluminum Factory Tells You-Aluminum Profiles Supplier
Author： WJW Aluminum Window Manufacturers
Everyone knows what is the melting point of aluminum? The aluminum factory tells you. The melting point of aluminum is the temperature of the metal from solid to liquid. This is a key physical nature of metal, which plays a vital role in material treatment.
In addition to the general purity, the melting point also helps determine the heat capacity of the material. It is important to understand the correct melting point of the aluminum alloy type, because it may be dangerous to deal with at the wrong temperature. Aluminum is a antioxidant material that is used for many different types of products. This is a light metal that is easy to use.
However, its melting point changes due to various factors. The melting can occur at various temperatures, but at higher temperatures, the melting range is usually narrow. When melting at home, make sure the area is safe and ventilated. Unless you have experience in metal, it is best to consult an expert. The alloy consists of a variety of elements, so the melting temperature of the material may be affected by its composition. Impoos can increase the range of melting temperature and also affect the performance of metal. These impurities will cause a reduction in melting point, decrease in strength, and release of toxic substances. The melting point of aluminum alloy depends on the amount of the existence element.
For example, magnesium can reduce the melting point.
In addition, the melting point of aluminum is also affected by metal composition and temperature. Similarly, the melting point of aluminum can be changed by pressure during heating.
If the pressure is too low, the melting process may be very dangerous and even leads to fire. Many alloys are designed to resist high temperature. The most common of which include copper, aluminum and manganese. Each of these alloys has a specific co -crystal temperature, that is, liquid and solid -state are in a balanced temperature range.
Generally, the common crystal temperature of aluminum, copper and manganese alloy is 450 C.
In addition, alloys containing other elements have a low co -crystal temperature.
Another factor affecting the melting temperature is stress. Increased pressure will increase the melting point. This is because the metal bond will break and the atom will break.
In addition, the connection of alloy elements can reduce the fixed -phase line temperature.
Therefore, the melting range of alloys is wide. Aluminum can be melted in the big bonfire.
Nevertheless, what is important is to keep the melting temperature as low as possible.
By keeping the temperature within the safe range, the melting metal can be safely poured into the mold. Then remove the mold material to curing metal. Using the correct tools and instructions, aluminum can be melted at home. However, it is recommended that only one responsible adult does so. No matter how you melt the metal, using hot gloves is always a good idea.
