Fixed-fixation of Home Improvement Aluminum Saws and Aluminum Alloy Doors and Windows-WJW Aluminum Supplier Aluminum
Author： WJW Aluminum Window Manufacturers
Household clothing aluminum sawing box.
1. The material on the conveyor frame should correspond to the corresponding aspect of the marks. The profile must not be rubbed with each other. The long and short materials should be protected between each other. The wrapping situation of hair strips, plastic parts, pay attention to rubbing with sharp hard metals such as naked iron frames.
2. Oxidation, spraying, sandblasting, rounding, punching, material, sawing, packaging, timeliness, natural materials, etc. After different processing requirements, different materials must be transported separately.
3. When installing the frame, pay attention to the cantilever compared to long profiles, thin walls, arc materials, aluminum materials for opening materials, solid small cross -sectional materials, plate materials, high surface requirements, mutual deductions, self -deduction or difficulty separation of profiles, etc. Pay attention to the method and method of installing the frame, as well as the necessary auxiliary tools, lining paper band, etc. The pads (pads) should be corresponding, the arrangement is correct, the interval is appropriate, and the number is appropriate. ) It can withstand the weight of the profile and a certain force. It cannot be pushed too much.
4. Pay attention to the position of the type of material stacked in the box to avoid the weight of both ends, causing accidents such as the formation of the profiles, slipping and other accidents. Pay attention to the sawing speed of the saw, the sawing the aluminum burr of the surface of the surface of the surface, and the amount of jets in the sawing bed. (Itinerary, severity), concentrated attention when sawing operation to avoid personal safety injury accidents. When cutting cutting, it is strictly forbidden to force force on both sides of the profile to avoid seeing the semi -scattered semi -sawing and sawing. Broken people again.
4. Pay attention to the blowing of aluminum dandruff, the burr should be scraped, the interval should be appropriate, the lifting is safe, the stacked frame must be aligned, the number of stacked frames cannot exceed the requirements of the 4 -layer quantity prescribed by the company.
The fixation of aluminum alloy doors and windows.
(1) When there are iron parts on the wall, the iron feet of the aluminum alloy doors and windows can be directly welded with the embedded iron parts on the wall.
(2) When there is no embedded iron parts on the wall, you can use metal expansion bolts or plastic expansion bolts to fix the iron feet of aluminum alloy doors and windows to the wall.
(3) When there is no embedded iron parts on the wall, you can also use an electric drill to hit 80mm deep on the wall and 6mm in diameter. Use the L -shaped 80mm 50mm 6rmn reinforcement. Then enter the hole, wait for the 108 glue cement slurry to end, and then weld the iron feet of aluminum alloy doors and windows and the buried 6mm steel bars, and the home is installed with aluminum.
