How Does the Building Curtain Wall Detect and Repair? -WJW Aluminum Supplier Aluminum
Author： WJW Aluminum Window Manufacturers
When will the building curtain wall be tested and repaired? 1. After the completion of the curtain wall project for one year, a comprehensive inspection of the curtain wall project is conducted, and then a inspection every five years; 2. The curtain wall should be deformed, dislocated, and loose. , Whether the main load -bearing components, connection components, and connection bolts of the curtain wall are damaged, the connection is reliable, and whether there is corrosion. 3. Whether the glass plate, metal plate, and stone are loose and damaged, especially whether there are cracks and defects on the surface of the stone; 4. Whether the sealing glue is dehydrated, cracking, foaming, powdery, sealing, aging and other damage phenomenon such as damage, etc. 5. Whether the opening part is flexible, whether the hardware attachment is failed or damaged, and whether the bolt or screws are loose or invalidated; 6. Whether the curtain wall drainage system is unblocked; Check and adjust every three years. 8. After 10 years of use of the curtain wall project, the adhesion performance of the organic silicon seal in different parts of the project is inspected, and it is checked every three years. 9. When the curtain wall is attacked by strong winds, a comprehensive inspection of the curtain wall should be performed in time to repair or replace the damaged components. Ten. How to repair and replace the glass of the building curtain wall damage? 1. Demolition of broken curtain wall glass and removing curtain wall glass are one of the most difficult tasks in replacing glass construction. In addition to fully grasping the structure of the original curtain wall, we also have rich work experience. Once the original curtain wall glass is broken, if you I accidentally break the glass fragments and other parts of the glass, especially the glass area is too large, it is even more difficult to remove the curtain wall glass. 2. Remove the original glass and put the tape on the surface of the fragile glass to ensure that the glass fragments will not fall off, and gently remove the broken glass from the surroundings. Use the suction cup to remove all the raw glass out of the safe barrel, clean the fragments around the glass, use it with the pieces of the glass. Wallpaper knife clear the sealing glue around the glass, remove the foam stick from the seam, and fix the aluminum alloy glass at the joints with a hexagon wrench. Take the glass mouth up and external suction cups, go down to the room, and slowly put it down until the landing is safe. The people inside hold the glass with their hands. 3. Disassemble the shattered aluminum alloy framework, and use double -component structure glue to stick the glass and aluminum alloy framework to a piece. The structural glue curing time is 2 hours. To the construction site.
