How to Prevent Insufficient Labor Time and Daily Cleaning and Maintenance-WJW Aluminum Supplier Aluminum

The industrial materials created by squeezing and manufacturing are too low before the economy, and it cannot be used as a finished product. Therefore, in general, the time limit is needed to increase the intensity. Generally, the timeliness can be divided into two types: natural and time limit for labor.

Control of production process :.

1. Temperature control of ingots: Temperature measurement should be performed before squeezing on the machine, and the machine can be made after the process requirements.

2. Online quenching process: Soluble -soluble insulation is the basic prerequisite for timeliness. There is no meaning without solid -soluble insulting timeliness. Therefore, the squeezer is based on the ingots number, the wall thickness, the squeezing speed, and the quenching of the squeeze. Equipment industrial materials to choose online quenching technology to ensure that the quenching and cooling speed meets the alloy's quenching sensitivity requirements.

3. Setting and control of timeliness furnace temperature: Generally, there is a certain error in the temperature of the timing of the furnace temperature and the timing of the timeline. When setting the table temperature, setting should be set according to the actual temperature of the furnace. Volatility.

4. Time insulation: The timeliness should be performed strictly in accordance with the requirements of the process. The insulation time should be appropriate to prevent the lack of time or excessive effects and cause insufficient hardness.

The squeezing box cannot be too dense, and there must be a interval between the materials and the material, especially the small materials that are not ventilated. The thick material interval is even more large -scale industrial materials. It is expected that it is conducive to the timeliness of the timeliness.

Before installing the furnace, other special alloys of 6XXX are separated from the time limit of the furnace with ordinary 6063 alloys. Due to the facts of manufacturing, when the furnace is time -effective, the process of special alloy must be taken for timeliness.

Industrial materials have a lot of characteristics, such as high hardness, light weight, light resistance, environmental protection, durability, etc., but good industrial products, if they are not used properly, unreasonable maintenance, maintenance and installation, it will also affect industrial material products products, which will also affect industrial product products. The appearance, the surface color.

When the industrial materials are moving, everyone should pay attention to putting it lightly to avoid scratches on the surface of the industrial materials, which affects the beauty of the shape. In the process of transporting , Prevent industrial materials from being erected.

When processing industrial materials, the operating procedures must be strictly implemented, and the operating status must be checked every day, and the process parameters are observed. The workpiece is not allowed to stagnate in the equipment to avoid rust. With residual liquid, if not washed, it affects the quality of the product, so it is necessary to clean the residue from the surface of the workpiece and industrial materials.