Industrial Aluminum Profile Fine Processing Process Introduction-Huachang Aluminum-Aluminum Profiles Supplier

The preliminary processes of industrial aluminum materials are rolled, squeezed, stretched, and forged. These steps squeeze the raw material aluminum rods into industrial aluminum profiles with different sections. Squeezing the demand for industrial aluminum profiles to stop cutting, pull -bending, stamping, appearance disposal, etc. These processes can enable the appearance of industrial aluminum profiles to form an oxide film and improve the chemical performance and mechanical performance of industrial aluminum profiles. The industrial aluminum profile displaced by the appearance needs to be processed by CNC or dedicated machine tools, welding and other equipment to stop the series. When the above steps are completed, the anode oxide industrial aluminum profiles with a length of 6 meters/tride can be obtained. At this time, it can be deeply processed according to the user's own needs.

Such as customized length, cutting, punching, attack wire, milling slot, and an aluminum profile frame cover of the assembly equipment. The deep processing steps of industrial aluminum materials are as follows:

1. Cutting: Industrial aluminum profiles are generally 6 meters/support. Generally, the profile is generally needed before the construction of the industrial aluminum profile structure. Cutting not only refers to vertical precision cutting, but also the flexible accuracy cutting of 45 degrees and any angle. Don't underestimate the cutting of the profile, because the cut saw blade is generally 3mm thick, so the size of these 3mm must be calculated in the cut size of the raw material. The experienced cutter can control the cutting error of the profile at 0.2mm-0.5 Within MM, the smaller the cutting accuracy error, the higher the accuracy.

2. Point: There are generally two types of punching in industrial aluminum profiles. The staircase hole is suitable for the precision instrument framework. It is a hole that uses a special drill with a special drill bit on the profile. The surface of the aluminum profile frame -like product connected to the aluminum -type bolt nut is used with smooth surfaces. The surface of the bolt is not visible, and it is invisible and beautiful.

3. Attack wire: Industrial aluminum profile attacks refer to the thread attack wire in the central hole of the profile. The size of the attack wire needs to be determined according to the size of the bolt used. Pole and attack are the standardized process in the production and processing process of industrial aluminum profiles.

4. Milling slot: The industrial aluminum -type milling slot actually refers to cutting a groove with a specific tool on the surface of the aluminum profile. Industrial aluminum -type deep processing criteria are: the more accurate, the better. After the deeper processing of the saw blade, it needs to be grinded, and after the cutting is completed, the aluminum chips generated during the processing process need to be cleared.