Industrial Aluminum Profile Surface Injury? Is There Any Good Solution? -Ruminum Profiles Supplier
Author： WJW Aluminum Window Manufacturers
The surface of industrial aluminum profile: scratching, abrasion, and touches:
1. The surface of the ingot is attached to the miscellaneous objects 2. The composition of the ingot composition is analyzed, and there are a large amount of analysis of the surface of the surface. 3. The ingot is not uniformly treated or uniformly treated in one. Metal particles. When the metal flowing through the workband during the squeezing process, these biased or hard metal particles are attached to the surface surface or cause damage to the working belt, and eventually cause the profile surface to scratch the surface of the profile.
4. The mold cavity or the workband has debris, the mold workband is low, so that the workband surface is injured and scratched the profile during squeezing; There are hard mixed objects. When it contacts the profile, it causes the surface of the profile to scratch the surface; 6. When the fork pole is delivered from the rails on the rail to the bed, the profile is injured due to too fast speed; Causes scratch; 8. Rubbing or squeezing between the profiles in the transportation process causes damage.
Aluminum profile surface solution:
1. Strict control of the quality of the chemical composition of ingots; 2. Improve the quality of mold repair, 3. Improve the accuracy of mold manufacturing and regular nitrogen nitrogen and strictly perform the parameters of nitride; Auxiliary device isolation. Try to reduce the contact damage of the profile and the auxiliary tools; 5. Put it lightly during production to avoid dragging or turning the profile at will;
The above points are the experience summarized by WJW Aluminum Profiles SUPPLIER. In order to reduce the differences in the surface of the aluminum profile, the details determine the quality. Each link is important.
