Author: WJW Aluminum Window Manufacturers
Summer is here, and many home furnishings need to be maintained with heart, otherwise it is easy to cause adverse changes in humid summer and affect the service life. The same is true of the aluminum alloy doors and windows of the home, which need to be well maintained. Provide 7 tricks for this.
1. In the use of aluminum alloy doors and windows, the movements should be light, and the pull is to follow its nature; if you find difficulties, do not pull hard push, you should first exclude the failure. The accumulation of ash, deformation is the main reason why the aluminum alloy door is pushed out of the new pull difficulty. Keep the door frame clean, especially the cleaning of the sliding tank. The ash can be used to absorb the ash in the groove and the door seal with a vacuum cleaner.
2. When cleaning aluminum alloy doors and windows, do not step on the aluminum frame, and do not pull the frame for support.
3. Aluminum alloy doors and windows can be dipped in soft cloth or neutral detergent. Do not use ordinary soap and laundry powder, let alone use strong acid -alkali such as dirty powder and toilet essence.
4. After rainy days, you should dry the wet glass and doors and windows in time. Pay special attention to drying and slippery water. For a long time, the friction is increased. You can add a little oil or apply a layer of fire wax oil.
5. The connection part of the aluminum alloy framework should be checked frequently, the bolt is tightened in time, and the damaged parts should be replaced. Positioning axis sales, wind support, ground springs and other aluminum alloy doors and windows, it should be checked regularly, and regularly add lubricating oil to keep it clean and flexible.
6. Sealing hair strips and glass glue are the key structure to ensure the insulation of the door and window sealing.
7. Regularly check the binding of the wall of the aluminum alloy box. If there is a loosening day, it will easily deform the frame and make the doors and windows be unable to close. Therefore, the screws at the connection should be tightened immediately. If the screws are loose, the epoxy powerful glue adjusts a small amount of cement and seal it.