Safety Operation and Medical Aluminum of Aluminum Doors and Windows and Windows.

Safety operating procedures for aluminum doors and windows saw.

The cut aluminum ingot must be stuck. When sawing aluminum ingots, the sculpture of the design and production process of aluminum doors and windows must not go too fast. The temperature of the aluminum ingot should not be too high.

When the saw blade is not completely stopped, the aluminum dandruff is strictly prohibited. The short head saw from the aluminum ingot must not be less than 20 mm.

When the saw blade returns to the original position, the aluminum ingot can be renewed to prevent aluminum ingot impact.

Can a saw an aluminum machine be seen?

You need to buy a saw piece again, because if you have seen plastic steel in the same saw blade, there will be a lot of hair edges in aluminum alloy, and the saw blade is not as sharp as aluminum doors and windows.

Can a sawdone cutting iron cutting pieces?

Yes, it is rarely a laser cutting machine. Most of them are traditional. It is suitable for sawing various copper, copper alloys, iron, stainless steel, seamless steel, and provided aluminum doors and windows squeezing mold design training aluminum doors and windows such as aluminum doors and windows , There are semi-self-moving type, artificial feeding, automatic folding, automatic sawing cut. It can be cut 90 , 90 -30 left direction cut, 90 -45 right to oblique .2, there is also a fully automatic type. Set up by programmable PLC program, automatically feed.

Why do medical aluminum spray powder.

1. The higher the purity, the better the corrosion resistance. The household name is well -known. The consequences of pure aluminum in the air and oxygen in the air will produce a layer of aluminum doors and windows in the name of medical aluminum. The metal oxidation film is generated quickly and thick, and then hindered the corruption of harmful gases and water in the air, and has the consequences of maintenance.

2. Although the corrosion resistance of pure aluminum is good, the mechanical strength is poor, which restricts the use of medical aluminum at a certain level. Therefore, everyone adds appropriate magnesium, copper, zinc and other metals to the medical aluminum. The high mechanical strength of aluminum alloy into various types of aluminum alloys has greatly improved the mechanical strength of medical aluminum materials. The use of the scope is greatly expanded. Although the mechanical strength of aluminum alloys is high, the corrosion resistance is worse than pure aluminum, so it may be possible Due to oxidation, the medical aluminum is light, high, high, corrosion -resistant, etc., which are generally used in wheelchair, stretcher, care bed, medical companion chair, medical equipment, etc. Electrical profiles are mainly used for various businesses, rack lines, rack lines, rack lines, shelf lines. Conducts, electrical components, refrigerators, air conditioners, cables and other fields, this requires powder coating to maintain medical aluminum materials. The aluminum alloy is small in size, easy to process, and large mechanical strength. On doors and windows, curtain walls and other products.

After powder painting, there are many advantages such as high corrosion resistance, diverse colors, and good nominal texture of medical aluminum materials. The weight of aluminum, high strength, corrosion resistance, etc., is generally used in wheelchair, stretcher, care bed, medical companion chair, medical equipment, etc., aluminum doors and windows.