The Role of Silicine Building Profile in Coatings-WJW Aluminum Supplier Aluminum

1. Ultra -fine siliconic acid constructive material changes to local titanium pink, the dry membrane covering force will not change, and it can improve the whiteness of the paint. If the amount of titanium pink is unchanged, its dry membrane covering force has improved significantly, and the whiteness has improved significantly. 2. The pH value category of ultra -fine silicic acid construction profile is 9.7 to 10.8, and its existence of pH value buffer. Architectural materials (such as plastic, aluminum, glass fiber, etc.) with a certain strength and toughness (such as plastic, aluminum, glass fiber, etc.) made by rolling, extrusion, casting, etc. Use the process of squeezing methods to produce profiles, squeeze the two categories: hollow profile and solid material. Especially in the process of storage of ethyl acetate latex paint storage, it can avoid the scene where the pH value is landed due to hydrolysis of ethyl acetate, increase the evacuation of latex paint, and avoid corruption of the inner wall of the metal container. 3. The ultra -fine and grid structure of silicic acid construction materials make the latex paint system slightly thickened, there is a good suspension, and avoid the presentation of solid sinking and the presentation of the nominal water separation scene. 4. Ultra -fine siliconic acid construction material makes the latex paint film has a good rubbing resistance, weather resistance, and can shorten the dry time of the watch. Architectural materials (such as plastic, aluminum, glass fiber, etc.) with a certain strength and toughness (such as plastic, aluminum, glass fiber, etc.) made by rolling, extrusion, casting, etc. Use the process of squeezing methods to produce profiles, squeeze the two categories: hollow profile and solid material. 5. Ultra -fine siliconic acid construction materials have anti -lighting effects, so it may be used as an economic elimination in hemogly and non -photoresia. It should not be used in light paint. Pay attention: When using it, the ultra -fine silicic acid construction material must be uniformly evacuated, which reflects the better efficiency effect, otherwise it may cause the latex paint. Architectural materials (such as plastic, aluminum, glass fiber, etc.) with a certain strength and toughness (such as plastic, aluminum, glass fiber, etc.) made by rolling, extrusion, casting, etc. Use the process of squeezing methods to produce profiles, squeeze the two categories: hollow profile and solid material. Construction of super fine silicic acid to change local titanium pink is a common technique in the coating industry at home and abroad. There are obvious economic benefits. The practical amount of ultra -fine silicic acid construction material in the light -free and hemial latex paint is 15-25%of the amount of titanium pink (4 to 6%of the total amount of coatings), but the conversion volume of different formulas is also different, advocating the advocacy, and advocate Each user uses some small tests before, and the amount of titanium white is replaced with a large limit without affecting the obstacle of the paint film to achieve better use consequences.