What Are the Installation Standards for Aluminum -type Doors and Windows? -WJW Aluminum Supplier Aluminum

What are the installation standards for aluminum -type doors and windows? Intersection

Aluminum profile is an important material for household doors and windows. Because we have different requirements for aluminum -type doors and windows, many family aluminum doors and windows are customized. The density value of the PVC core filled in the middle of the market is generally about 1.4-1.8 (the smaller the density value, the better the quality). The home improvement aluminum has two aluminum plates, and the honeycomb aluminum core is filled in the middle. The density of aluminum honeycomb cores on the market is generally 5*0.03 (5 is the length of the honeycomb core, and 0.03 is the thickness of the honeycomb core. The smaller the side length, the higher the density, the larger the thickness value, and the higher the strength). Compared with the two materials, their functions are the same, PVC plates are heavier and more economical, while honeycomb boards have higher environmental protection factor, but they have complicated processing and high cost. At present, consumers of all aluminum family can generally accept these two materials. The doors and windows aluminum alloy doors and windows materials are connected to the wall material. The main feature is that the surface of the connection with the wall is mostly plane, and it cannot be moved on the wall. So, what is the manufacturing process of aluminum doors and windows? let us see.

Aluminum alloy doors and windows production process process: four steps for the production process of aluminum doors and windows: 1, 2 crushing materials, drilling 3, 4 parts, or packaging protection

1.

It is also known as the feeding. It can be made in the processes in front of the aluminum -type doors and windows, and it is also a key process. The cutting material is mainly through different cutting processes and equipment. The material length should be determined according to the development requirements of doors and windows projects according to the development requirements of teaching design, and the cutting is required to be accurate; otherwise, the orthopedic degree of the doors and windows is difficult to guarantee that the error value of the cut size should be controlled within 2mm. Generally speaking, sliding doors and windows should be cut in right -angle; the open doors and windows should adopt 45 types of data types. The company shall select the cutting management mode according to the assembly working mode.

2. drilling

The framework of aluminum doors and windows is usually connected with screws. Therefore, whether it is the assembly of the horizontal rod and the vertical rod, or the fixing of the attachment, it should be drilled at the corresponding position. In the sectional surface drilling, small tables or electric drills can be used. Because the former has a workbench, it can effectively ensure the accuracy of the drilling position, and the latter is convenient to operate.

Before drilling, the line should be played on the section according to the requirements of the assembly technology. The information of the drilling position is required to be accurate, and the pore diameter is reasonable. Due to repeated drilling on the surface, repeated drilling on the surface is not allowed.

3. Assemble

The aluminum profile is assembled by screws according to the construction diagram. There are three types of assembly methods for aluminum -type doors and windows: 45 angles docking, right -angle docking and vertical docking. The connection method of the vertical rod is usually a dedicated joint or aluminum angle, and then fixed with screws, bolts or aluminum screws, and the rest is packaged and protected