What Are the Operation Steps of Industrial Aluminum Extrusion Machines? -Ruminum Profiles Supplier

The scope of industrial aluminum application is becoming more and more wide. For production staff, it is essential to master industrial aluminum squeezers. So, what are the operational steps of industrial aluminum squeezers? 1. Check whether the oil pressure system leaks oil and the air pressure is normal.

2. Check whether the transmission belt, cold bed, and storage table are damaged and scratched industrial profiles.

3. Before stretching, confirm the length of the aluminum profile, and then book the stretching rate to determine the stretch length, that is, the main sandwich movement position, usually 6063T5 stretching rate is 0.5%-1%, 6061T6 stretching rate is 0.8% -1.5%.

4. According to the shape of the industrial aluminum, confirm the method of holding the holding method, and the hollow fabric of the large surface can be plugged into the stretch pad, but try to ensure that the holding area is enough.

5. When the aluminum profile is cooled to below 50 C, the opening can stretch the profile.

6. When the profile is curved and twisting at the same time, it should be corrected first and twisted. 7. Trial pull in the first and second roots to confirm whether the scheduled stretching rate and holding method are appropriate. Visume, twist, twist, check the plane gaps, expansion, and mouth of the profile. If it is not appropriate, adjust the stretching rate appropriately. 8. When the normal stretching rate still cannot eliminate bending, twisting, or if the geometric size cannot be qualified, the operator should be notified to stop squeezing. 9. The profiles on the cooling table cannot be rubbed, collided, overlapped to prevent rubbing flowers. The working efficiency of industrial aluminum extrusion machines and the length of service life are very related to the installation order of the industrial aluminum squeeze. In addition to the weight of the raw material, the dynamic loading effect of the worker squeezer should also be carried out, so the equipment installation must be performed in accordance with the corresponding installation program.