What Are the Processes of Squeezing the Production and Processing of Aluminum Profiles? -Ruminum Profiles Supplier
Author： WJW Aluminum Window Manufacturers
We need to know that if aluminum profile is to be produced, we need to use aluminum profile extruded equipment production lines. There are 6 equipment for the complete aluminum profile production line, namely: aluminum profile extruder, long stick hot cutting furnace, aluminum alloy time -effective stove, molds, molds, molds, molds, molds, molds, molds, molds, molds Furnace, traction vehicle and cooling bed. So, do you know the use of these 6 devices? What is the production process of squeezing aluminum profile? Aluminum profile 1. First, hang aluminum rods onto the material rack of long rod thermal cutting furnace, and then scatter the aluminum rod on the material rack to ensure that there are no stacking rods and avoid accidents and mechanical failures.
2. The standard operation of aluminum rods enter the stove. It is recommended to store 12 aluminum rods in the stove, and then heat it. Heat at room temperature for about 3.5 hours. The temperature can reach about 480 C (normal production temperature), and heat the heat for 1 hour. Ready to produce! 3. While heating aluminum rods, put the mold in the mold furnace for heating! (About 480 C) 4. After heating the aluminum rod and mold, put the mold into the mold base of the extruder.
5. Operate the long rod thermal shear furnace, cut aluminum rods and transport the inlet of the raw material of the squeezer.
6. Place the squeezing pad to operate the squeezer squeezing the raw material 7. The profile enters the cooling air phase by squeezing the exit hole, and the length of the tractor is dragged and saw the fixed length. 8. The cooling bed is transferred to the platform to transport the aluminum profile to the transfer station, and the aluminum profile is modulated and corrected. 9. The corrected aluminum profile is transported from the conveyor platform to the finished table for a long saw.
10. Workers will frame the completed aluminum -shaped materials and transport them to the time -effective furnace. 11. The operating will work hard to push the completed aluminum profiles into the furnace for a timeliness, the temperature is about 200 C, and heats up for 2 hours.
12. After discharge and cool down, get the finished aluminum profile with ideal hardness and standard size.
