What Are the Processing Thickness of Industrial Aluminum Profiles? -Ruminum Profiles Supplier
Author： WJW Aluminum Window Manufacturers
Many people think that as long as the industrial aluminum profile is thick enough, the quality of industrial aluminum profiles will be better. It will blindly pursue thickness and only choose industrial aluminum profiles with sufficient thickness. In fact, this is wrong, right is good. The thicker the industrial aluminum profile, the stronger the capacity of the carrier, the better the loading capacity, and the more stable the status. What is the thickness of industrial aluminum profiles? 1. The unit weight of the industrial aluminum profile, that is, rice weight. The thicker the wall, the higher the unit weight of the unit, the thicker the wall, the higher the rice weight, and of course the higher the price. For the same series, the industrial aluminum profiles of different specifications also have wall thickness.
2. The bearing capacity of industrial aluminum profiles, that is, bearer. In principle, the thicker the wall of the aluminum material, the better the carrying capacity, which is one of the reasons for many people to pursue wall thickness.
Therefore, the thick -wall aluminum profile framework is used for large frame structures with high load capacity, which is relatively stable and will not shake due to the deviation of the bearing capacity during normal runtime.
3. Application of industrial aluminum profiles. The same series will have different specifications, from light materials to standard profiles to heavy profiles. Each configuration file has its special application scope.
For example, light profiles can only be used for minor stress small frameworks, and heavy profiles must be used for large frameworks of Da Chengzhong. Although we summarize the high thickness of industrial aluminum materials above, we have many advantages, but in comparison, we need to choose from the actual situation.
If the heavy profile is assembled into a small frame that does not require any force, it will directly generate cost waste, and heavy profiles will definitely be much more expensive.
Secondly, there are unnecessary losses in the design of assembly parts. So choosing the right thing is the most important.
Well, this is here today. Hope the above content is useful to everyone!
