Author: WJW Aluminum Window Manufacturers
The common disadvantages of industrial aluminum profiles in the squeezing processing of aluminum alloy profiles of radiator are bending, twisting, deformation, flying edge, etc. However, the disadvantage of "absorbing particulate matter", it is difficult to find. The harm is: in the production process of electrophoresis and spraying aluminum profiles, there is no way to get rid of it, endangering the beauty of the surface of the aluminum profile, leading to waste. The main reasons for "adsorption particles" are as follows: The quality of industrial aluminum profiles is the key factor that endangers the surface layer and squeezing processing of the radiator aluminum alloy material. The inducement of "adsorption particulate matter" is closely related to the quality of cast sticks. The defects of the casting institution generally include flying edges, loose, crystal thickness, shrinking holes, crystal light, etc. All the flaws of the cast stick have the same point, that is, the welding of conventional and cast rods is not very good, resulting in the discontinuousness of conventional liquidity. This is a key factor in producing "granular adsorption". In the squeezing manufacturing of industrial aluminum profiles, the abrasiveware work under ultra -high pressure, which will generate deformation. When the grinder works, the parallel surface of the belt is in the direction of squeezing at the beginning. After being under pressure, the belt is deformed into a flared shape at work. Only the teeth of the belt are exposed to the sticky aluminum produced by the radiator aluminum alloy profile, similar to the knife -cut tumor. During the whole process of sticky aluminum, the particles are constantly drawn from the aluminum alloy profile of the radiator, which is attached to the surface of the aluminum profile, causing "granular adsorption". Whether the main parameters of the industrial aluminum profile squeezing processing process are suitable?.
If the squeeze temperature is too high and the extrusion speed is too fast, there will be more "adsorption particles". The reason is that the liquidity rate of aluminum profiles and the deformation level of abrasives are increased due to high temperature and fast speed. The liquidity of metal materials is accelerated, and the deformation resistance of metal materials is relatively weak, which can easily cause sticky aluminum. There are three levels of key hazards of industrial aluminum profiles "particulate matter absorption": cast rods, abrasives and extrusion processing processes. The actual operation level of the actual operator is also reflected in these three factors. Based on the practice of life, it can reduce or prevent "particulate matter absorption", and further improve the output rate and productivity of the aluminum alloy profile of the radiator.