What Is a Sliding Window? the Advantages and Disadvantages of Aluminum Alloy Sliding Windows! -Ruminum Profiles Supplier

The structure of sliding windows is simple, it can slide left and right or open up and down, and the lighting efficiency is high, but it is easy to leak water and does not heat up.

How to choose depends on local conditions. The structure of the sliding window is relatively simple, that is, the window is supported by several groups of pulleys to open it. This is a detailed introduction to the aluminum pull window. The windows of other materials will not be introduced.

1. The sliding window introduces the sliding window can be divided into left and right openings and up and down opening according to the opening method, and two or three track types can be selected. According to the different structures of aluminum alloy materials, it can be divided into ordinary pull -up windows and crushing aluminum pull -ups. The structure of ordinary sliding windows is simple, and it can only block the wind and rain, and the performance has not improved greatly.

However, due to the internal structure of insulation and sound insulation, the broken bridge series has high cost performance.

2. The advantages and disadvantages of aluminum alloy push windows

(1) Advantages of sliding windows rely on the pulley to move left and right to open, so the sliding window does not take up the indoor space, which can save a lot of indoor space and easy to install the furniture such as curtains, cabinets. The structure is simple, the indoor lighting effect is good, and the price is cheaper than the flat windows of the same level.

If a broken bridge aluminum push window is used, the shortcomings of the heat insulation, sound insulation and noise reduction of ordinary pull -up windows can be supplemented accordingly.

(2) The disadvantage of sliding windows, whether it is ordinary aluminum alloy sliding window or the aluminum sliding window of the broken bridge, is not as good as opening the window in terms of waterproof performance, gas tightness and sound insulation. This is determined by the window structure.

Although the lighting is good, the opening area is only 50 %, the air tightness is poor when closed, and the ventilation effect is not good. Higher energy consumption. The insulation effect of the unable to reach the flat window will quickly pass the heat in the room, resulting in a faster cooling in the room and increasing the energy consumption of equipment such as air conditioners. The windproof performance is average. The aluminum sliding window mainly relies on the pulley to support the horizontal wind, while the pulley is ordered by the track. The wind is too large or the windows are easy to fall. It is easy to accumulate dust in the window rail and not easy to clean, which is also a small disadvantage! 3. Whether the sliding window is suitable for you

(1) The biggest impact of environmental factors on the surrounding environment should be regional differences. The temperature difference between north and south is very large. The north focuses on insulation and qi. Some areas in the south are raining, so they should pay more attention to water density, that is, waterproof performance.

For example, there are more wind and sand in some areas, so higher gas is required.

In addition to the general environment on people, it also includes the impact of the surrounding small environment, such as the height of the residential floor, whether it is located near the busy city, whether there is a major transportation path, the level of the city's wind and rain, whether there is demand for anti -theft, or even the surroundings around the surroundings, or even the surroundings. Is there a square dance group? In fact, these influencing factors are considered around thermal insulation performance, sound insulation performance, wind resistance, water density and gas tightness.

(2) After the policy and regulations are clearly considered by environmental factors, we also need to pay attention to the influence of local policies and regulations. In the "2009 National Civil Engineering Design Technical Measures Planning, Architecture and Landscape Design" guide, it provides for this. Multi -storey houses (less than or or equal to 6 floors) often use flat windows or sliding windows; Open the window. When using sliding windows or outer windows, measures should be taken to strengthen the fan and prevent it from falling off. In the GB 50352-2005 "General Principles of Civil Architecture", the definition of high-rise buildings is as follows:

The 1st to 3rd floor is a low -level, 4 to 6 floors are multi -layers, 7 to 9 are middle and high -rise, and the 10th and above are high -rise residences. It should be noted that different regions and even different communities have different requirements for the installation of windows. In order to determine whether the flat window is suitable for you or sliding windows, you need to combine the above influencing factors to determine your own requirements for insulation, sound insulation, wind resistance, water density and gas density, and then select the aluminum alloy window type.

4. Recommended suggestions for safety considerations and unified style of residential buildings, prohibit the installation of sliding windows in high -rise in certain regions or communities. It is recommended to install the protection network to prevent the window from falling. The sound insulation of the sliding window is not as good as the winding window, so it is recommended to install it in a relatively quiet position (the broken bridge aluminum sliding window can reduce part of the noise), less rain and good air quality. There are many precautions for outdoor windows, and indoor windows can be installed according to your preferences and space.