What Is the "three-sex Test" of Curtain Wall Performance Testing-WJW Aluminum Supplier Aluminum

1. Detection contains wind pressure deformation functions, air tight function and water density function, which is usually so -called "three -sex experiments". If necessary, you can increase the deformation function and other functional detection. The so -called "four sex".

Second, corner steel and slot steel do not need to re -test. The information that needs to be re -test in the curtain wall project is:

1. The peeling strength of the aluminum -plastic composite board;

2. The twists and turns of stone, the frost resistance of stone in the cold area, and the spraying of granite in the interior;

3. The hardness of the Shaw's stretch of the curtain wall is stretched and bonded strength under the premise of the standard;

4. The staining of the stone with a seal;

5. The curtain wall of the curtain wall, weather -resistant sealing and the compatibility and peeling adhesion experiments of the contact data (these two indicators can not be supplied during the performance of the sealing gel out of the factory, but must be renewed before the sealing).

3. Number of sampling of re -inspection materials: In the data that requires re -inspection, the same variety and the same type of entry information produced by the same manufacturer should take at least one set of samples for re -check. fulfill.

4. Those who need to do on -site experiments are:

1. On -site pull -up experiments of the rear embedded parts, the amount of extraction should be carried out in accordance with the proportion of standards.

2. The peeling experiment of the silicone structure seal, the extra number of the draw is drawn by 1 per 100 components. The building curtain wall is composed of a supporting structure system and panel. It can have a certain displacement capacity compared to the main structure, regardless of the main structure of the main structure or decorative structure.

3. For the curtain walls that have special requests or special requests, the division of the examination batch and the number of inspections of each test batch shall be negotiated and judged by the supervision units, construction units and construction units according to the structure, process characteristics of the curtain wall and the scope of the curtain wall project.

4. Dripping experiments, all do.

5. Division of examination batch:

1. Same design, data, technology and construction premise curtain wall projects per 500 to 1,000 square meters are a test batch, and less than 500 square meters should be divided into one test batch; each test batch should be raised at least one check every 100 square meters. It must not be less than 10 square meters. The curtain wall is composed of a structure frame and inlaid plate, and the building enclosure structure that does not bear the main structure load and function.

2. The discontinuous curtain wall project of the same unit of project shall be separated by the examination batch separately. The doors and windows and curtain walls have a panel and a support structure system (supporting device and support system). It can have a certain displacement ability or a certain deformation capability compared to the main structure of the main structure.

3. For the curtain walls that have special requests or special requests, the division of the examination batch and the number of inspections of each test batch shall be negotiated and judged by the supervision units, construction units and construction units according to the structure, process characteristics of the curtain wall and the scope of the curtain wall project.

1. The mechanical machine energy test lecture on aluminum alloy profile

2. Examination of hollow glass, lecture on the optical function test of thermal reflected glass

3. Structural Silicone Plastic Dipping Experiment, Silicone Structural Adhesive Sealing and Actual Engineering Relax Test Examination

4. Four -sex detection of curtain walls

Unit glass curtain wall and frame glass curtain wall. Test list

Plate -type embedded parts, groove embedded parts, chemical anchors, steel original materials, aluminum profiles, glass, aluminum plates, insulation cotton, fireproof cotton, structural glue, bolt, curtain wall, stone, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD, EPD

M, rubber strip.