Outdoor Main Gate Design Country Aluminum Door Western Aluminum Sliding Gate Front Gate Automatic Aluminum Sliding Door Commercial Gates System

Heavy-Duty Bottom Beam
Well-designed bottom beam with carriage wheel to adapt to various environments.
No embedded design, three-point positioning, easy to install.
Carriage wheel equipped with 10 rollers to ensure smooth opening and closing of the cantilever sliding gate.

Infrared Sensor
Standard 2 pairs of infrared.
Anti-collision design: When the gate is closing status, if the infrared detector sensed people or obstacles, the slide gate will immediately stop and return to assure safety.

High-strength Nylon Rack
Specially selected nylon rack, suitable for most gate motor gears.
The gate body is pre-punched, and the rack just is fixed with screws for easy installation.
Electromagnetic limit controlled stop and opening position.

Cantilever Sliding Gate Features
1. The gate is suspension linear sliding, no need any rails pre-laid on the ground, so it's very easy and simple for installation and maintenance.

2. Once the motor temperature exceeds 120°C or the gate is working for a limited time, then the motor will auto stop working for protection and prolong its lifetime.

3. The gate equipped with clutch key and during the time of testing, repairing, maintenance or power failure, the clutch can be released and then it can be controlled manually.

4. The remote controller is available for the gate, and the active distance is less than 50 meters without obstacles, also the gate can be controlled by extra smart access control system.

5. The gate is with leakage protection to protect over voltage or current in control system to connect ground. 

6. The gate works smoothly, stable and quiet with high security, low noise, low failure rate and long service time.

7. The gate is widely used in the circumstances of wind, rain, ice, snow, slope, over railway or track and even some other tough conditions.